You can reach me at phinishline@yahoo.com for comments, questions, and suggestions.
This is very simple to make. You can get the pumper bulb at any medical supply store. It is used for doing blood pressure test. It cost me about $6.00. The 1/4" tee and hose barbs I got from N.A.P.A. in the brake fittings section. I have about $3.00 in all the fittings. I got the 0-30psi gauge from Grainger for $2.00. The 1/4" flexible tubing is some old fuel line I had laying around. As you can see this is a cheap alternitive to paying $30.00 to $50.00. Any questions e-mail me below.
You can reach me at phinishline@yahoo.com for comments, questions, and suggestions.