PARTS LIST

The way this parts list reads is: Description-Part Number-Vendor-Price. Keep in mind that this is the vendor I used and the price I payed. You may find the parts cheaper or from a different vendor.

• Barnes Pressure-Balanced Gear Pump - 10578-C112 - Northern Hydraulics - $155.99.
• The pump listed above is no longer made. I talked to the guys at Haldex/Barnes pumps and they gave me a new part number. Right now Northern does not have the pump so you will have to find a hydraulic supply house that stocks or sells Haldex/Barnes pumps. The part number is 1303205. That is for a 1.4 cubic inch, 3,200 max psi, 95% efficient, pressure balanced gear pump. That should work nice for you.  Hydraulic Supply Company is a large stocking distributor of Haldex/Barnes pupms and parts.
• 12 gallon hydraulic Tank - 4053-C112 - Northern Hydraulics - $69.99.
• 3/4" Lovejoy Pump Coupling - 3014-C112 - Northern Hydraulics - $8.99.
• 1" Lovejoy Axle Coupling - 3017-C112 - Northern Hydraulics - $8.99.
• Heavy Duty Coupling Insert - 3022-C112 - Northern Hydraulics - $6.49.
• NOTE: If you plan on using the dyno to test OHV engines then the Lovejoy couplers will NOT work. See below for the double row chain part I now use.
• 3/4" Chain Coupler - 3X990 - Grainger - $16.86
• 1" Chain Coupler - 3X992 - Grainger - $16.86
• Double Role Chain - 3X995 - Grainger - $12.74
• Tank Suction Strainer - 4010-C112 - Northern Hydraulics - $15.59.
• Flow Control Valve - 2058-C112 - Northern Hydraulics - $37.99
• 10" Hydraulic Tank Level/Temp Gauge - 6W390 - Grainger - $20.20.
• 6" 0-2000p.s.i. Liquid Filled Pressure Gauge - 7A30-S61-316SS-2000 - Mitchell Instrument Co. - $119.00
• 1" Kart Axle - AZ8123 - Appco - $30.00.
• (2) 1" Mounted Ball Bearings - 4X726 - Grainger - $20.28(each).
• 60' - 2-1/2" x 2-1/2" x 1/4" Steel Angle - ??? - Local Hardware Store - $45.00.
• 40' - 1-1/2" x 1-1/2" x 3/16" Steel Angle - ??? - Local Hardware Store - $20.00.
• 20' - 2" x 1/4" Flat Steel - ??? - Local Hardware Store - $9.00.
• I have found it easier to contruct the dyno frame out of 2" square tubing instead of the angle. It is much more sturdy and easier to build. Build the control stand out of 1" square tubing.
• Misc. 3000# steel fittings - ??? - Local Pipe and Supply Store - $30.00.
• Hydraulic Fluid (10 gallons) - ISO-68 for extreme conditions - Local Hydraulic Supply Store - $40.00.

Back to Dyno Main Page

You can reach me at phinishline@yahoo.com for comments, questions, and suggestions.


This page was last updated on 07/06/2004.