DYNO FLOW DIAGRAM
This is how the parts fit together:
- Out of tank (through suction filter - not shown on
drawing).
- Up to Pump
- Through Pump
- From pump to the "T" block that holds the
Pressure Gauge
- Out of the "T" block to the Needle Valve
- From Needle Valve through the optional return filter and
back to the Tank
This is how the fluid flows out of the tank and then back to
the tank.
Back to Dyno Main Page
You can reach me at phinishline@yahoo.com for comments, questions, and suggestions.
This page was last updated on 07/06/2004.